Article published by : Michael Foley on Monday, February 26, 2018 - Viewed 70 times

Category : Tools and Equipment

8 Tips for Better Rebar Cutter Safety

Rebar cutters are important tools in construction worksites, particularly in midrise and highrise structures which rely upon metal rebar for support. Rebar, also called reinforcing bars, arrive at the worksite in standardized spans, and it is normally up to the workmen to change the steel bars according to their own specifications and requirements.

Rebar cutters are utilised to cut reinforcing steel bars into smaller bits. Rebar, when combined with concrete, gives buildings improved integrity and tensile strength and permit architects to design constructions impossible to assemble without the support supplied by rebar. Rebar is so powerful it is extremely hard to cut it with routine power tools. Tools such as rebar cutters do so.

There are lots of sorts of rebar cutters. Some rebar cutters rely on the manual power of the user while others use a power source, either from the mains or from batteries.

Rebar cutters can be deadly when mishandled. Listed below are a number of recommendations to ensure the proper and safe usage of a rebar cutter.

1. Inspect the rebar

Cutting portions of rebar could end in the cut pieces flying outwards. This poses a danger to fragile materials like glass to neighbouring people, as well as the user.

Don't cut rebar that's denser, thicker or thinner than that which your own rebar cutter is designed to cut. Cutting rebar that doesn't fall within the limits of the cutter's specifications may damage the instrument and pose a hazard.

2. Wear appropriate safety equipment

Always wear personal safety gear when using tools such as a rebar cutter. Standard safety equipment includes eye goggles, mask, safety helmet, impact-resistant work gloves and boots.

Do not wear clothes, jewellery and items that are hanging since they can get caught up in the moving parts. Tie your hair up.

3. Put up safety displays

Put a safety screen to protect people while utilizing a rebar cutter. Cut rebar can take out at fast speeds and possibly hurt or impale those in the place. When functioning in elevated places like on scaffolding, put a safety screen around the perimeter.

4. Maintain a balanced base

Particularly when working from a scaffold, maintain proper footing and balance when trimming rebar. Don't cut or cut rebar in windy or wet conditions.

Make sure that the rebar cutter is secured to the scaffolding using a safety rope. A falling rebar cutter may harm the structure and severely injure people.

5. Keep the tool dry

Construction is generally suspended during damp or rainy weather, and rebar cutting is no exception. Never reduce rebar if your hands are wet or moist. This reduces the odds of electrocution and slippage.

6. Clear the area

The area ought to be free of others and creatures. You typically don't need to do so if you run in a safe building website, but if you're working within an open environment, maintaining a safety zone is essential in ensuring that the protection of everyone. Do not let people play a rebar cutter.

7. Unplug the tool

Check whether the rebar cutter is disconnected from a power socket before cleaning, servicing and making alterations to the settings. Disconnect the cutter's plug by gently pulling the cable. Ensure that the filler is switched off before plugging the apparatus in.

8. Store properly

Store a rebar cutter in a secure and clean environment. Don't use a rebar cutter near flammable materials like gas and paint thinner. The opinion of the tool, the worksite and the rebar ought to be unobstructed.


Keywords: rebar cutters

By: Michael Foley

Article Directory:

Copy and Paste Link Code:

Read other Articles from Michael Foley: More »

Article ID 1058068 (Views 70)

Sponsor Listing Canadian Pharmacy